How do you really feel when it comes to What Would Cause My Electric Water Heater to Stop Working??
Lots of modern homes take advantage of an electric water heater for their heating unit, as a result of its comfort as well as simplicity of use. However, just like any other electric home appliances, issues might arise with its usage, suddenly. It can be really irritating to wake up to a chilly shower as opposed to a hot one or having your bath with water that isn't warm adequate and even too hot. Whatever the situation may be, hot water heater problems can be rather stressful. The good news is, we have actually made a list of feasible remedies to your water heater concerns. There are a number of variables that could trigger a lot of these troubles, maybe a problem with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you turn off the primary power supply for safety. Whatever the problem is, getting it taken care of need to not position too much of a concern if you comply with these actions:
Call A Specialist:
If after replacing all damaged components and resetting your temperature, the hot water heater still isn't functioning, you might require to contact an expert plumber for an expert opinion. The problem with your heater could be that the cold and hot taps have actually been changed or it might be undersized for the quantity of warm water needed in your house. Whatever the situation might be, a specialist plumber would aid address the problem.
Inspect Your Power Supply:
As standard as this might seem, it is extremely necessary. Without appropriate power, your hot water heater will not work. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power issue. Check if the fuse is burnt out or the breaker stumbled. If the circuit breaker is the problem, merely turn it on and off again. Change any type of broken or damaged fuse. Examine the device with power after these changes to see if it's now working.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you may require to examine the temperature level setups on your top thermostat. Ensure the breaker is switched off before doing anything. Open the access panel as well as press the red button for temperature level reset above the thermostat. This need to assist heat the water. Transform the breaker back on and also check if the trouble has been solved.
Examine the Heating Element in the Water Heater:
If it's not a power trouble, after that attempt looking into your burner if it is still functioning. Check each of your heating elements to make sure the problem isn't with any one of them. If any one of them is defective, replace that part and after that check whether the hot water is back on.
Verdict
Water heater problems are not constantly major. Most of them are due to small issues like a blown fuse or damaged burner. Changing the faulty parts should do the trick. Nonetheless, if you are still incapable to address the problem, give a call to your nearby plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Do you really like reading up on Hot Water Heater Repair? Put feedback further down. We will be interested to find out your ideas about this write up. In hopes to see you back again in the near future. Those who enjoyed reading our article kindly remember to share it. Many thanks for your time. Visit us again soon.
Customer Reviews